Honda Talon X 0" Lift, Fwd Arms (Bare Metal)
 
These arms move the front wheels forward 3" and provide about an inch of lift. If desired, the compression rings on the shocks can be adjusted out to reduce ride height and soften the suspension a bit more.
 
This kit works perfectly with stock axles and stock tie rods and allows you to clear a 35" tire with zero rub (Some tire and wheel combinations require 1" spacers, 4+3 or 0mm offset wheels recommended). 
 
This kit is built out of 1.25" x 3/16 wall DOM tubing and comes complete with custom upper ball joints that are 7/8" chromoly heims with custom cut pins, upgraded 3/4" chromolly heim joints and custom bushing spacers. (This kit maintains the factory lower ball joints and tie rods)
 
Our TTC Talon X Forward Arms maintain Talon X stock width (64") with stock axles. 
 
If you are going to be running Portals with this kit, we highly recommend that you upgrade to our XL tubing lower arms.
 
If you are planning on running portals and tires larger than 40", you need to run our Ball Joint Delete Kit.