TTC 0" Lift Kit (Powder Coated)
 
Our TTC 0" Lift Kit maintains stock width with stock axles, and pushes the front wheels forward 3.5" and the rear wheels back 2.5", without adding any lift. Our 0" Lift Kit come complete with TTC HD tie rods, custom ball joints that are 7/8" chromoly heims with custom cut pins, SATV UHMW bushings, and all necessary hardware for installation. (Bracket lifts can not be used with any of our TTC lifts)
 
This kit works with all modles of the Pioneer 1000, and will work with stock 14" wheels.
 
These arms make it possible to run up to a 30" tire (some 32's) in the front with zero rub, although some wheel and tire combinations will require wheel spacers. (5+2 offset not recommended without 1" spacers) (4+3, or 0mm offset is recommended)
 
GIVE US A CALL BEFORE YOU ORDER if you plan to run portals and tires larger than 35". We recommend adding front link bars to help take stress off of the lower arms and lower frame tabs, as well as a few other upgrades depending on your setup.
 
For installation instructions, download PDF in footer at bottom of page and watch our video for refrence.
 
What is the 2 bolt design front upper arm upgrade? (Not available for 2022+ year models) This upgrade is for those extreme builds or those having trouble with the upper frame tabs wallering or ripping. Our 2 bolt design converts the stock front upper arms from the long 10mm bolt, to two 12mm bolts at the frame. This increases strenght and drastically decreases the possibility of ripping the upper frame tabs. Our 2 bolt design kit comes with all the parts and hardware needed for installation. (This upgrade requires welding two extra tabs to the frame on each side.)