TTC 3" Lift (Bare Metal)

TTC 3" Lift (Bare Metal)


This lift if for the Honda Pioneer 1000 and comes with everything you need to bolt on and ride. This kit contains front and rear upper and lower arched a-arms, TTC HD tie rods, ball joints, SATV UHMW bushings, and all necessary hardware for installation.


Our TTC 3" lift maintains stock width and moves the front wheels forward 3.5" and the rear wheels back 2.5", giving you an extra 6" of wheelbase. This makes it possible to run atleast a 32" tire with zero rub. Some wheel and tire combinations will require wheel spacers. (5+2 offset not recommended)


If you plan to run portals and tires larger than 35" we Recommend adding front link bars to help take stress off of the lower arms and lower frame tabs. 


Note: You must remove the sway bar with this kit.


For all the details, visit our "Lifts" section under "Details." 


For installation instructions, download PDF in footer at bottom of page. 


What is the 2 bolt design front upper arm upgrade? This upgrade is for those extreme builds or those having trouble with the upper frame tabs wallering or ripping. Our 2 bolt design converts the stock front upper arms from the long 10mm bolt, to two 12mm bolts at the frame. This increases strenght and drastically decreases the possibility of ripping the upper frame tabs. Our 2 bolt design kit comes with all the parts and hardware needed for installation. (This upgrade requires welding two extra tabs to the frame on each side.) 


TTC 3" Lift (Bare Metal)

  • If you are dissatisfied with our product, call or send us an email to set up a return within 30 days of receipt of the product. Shipping charges are non refundable and customer pays return shipping.

  • Free shipping on all of our complete lift kits.